Analysis of the best glaze for exterior painting projects (2023)

Nowadays, not only a glossy surface is suitable for exterior painting

Receive offers of up to 3



Enter a zip code below and match with top professionals in your area.

Gloss refers to the gloss of the paint surface and how much light reflects off the surface. There is no single "best" gloss for exterior painting. You should base your choice on the look you want, the material you're painting, the condition of the finish, your budget, and more. Regardless, the gloss you choose will have a major impact on the outcome of your project.

Thethe benefits of painting the outside of your homeIt's about more than just increasing your attractiveness. A new coat of paint will help protect the moldings and trim and extend their lifespan. But there's more to considerChoosing the right paint color. The sheen you choose affects the overall aesthetics and durability of the color.

The types of exterior paint have made great strides in the last few decades. That means you don't have to limit yourself to just glossy finishes to get the strength and weather resistance you need. However, some formulas are more forgiving of surface imperfections and others offer extra durability. He's struggling to find somethingbest type of exterior paintGraduation is planned for the renovation of your home? This guide will help you decide.

1. Flat/Matt

Analysis of the best glaze for exterior painting projects (1)

Foto: Joe Hendrickson/iStock/Getty Images Plus

Slightly glossy, matte or non-reflectiveflat colorsare fasteners for interior surfaces. Due to their lack of durability, however, they were previously taboo for the outside of the house. However, in recent years manufacturers have introduced harder matte finishes for use on exterior surfaces.

These resin paints have little to no gloss - typically up to around 12% reflectance - and therefore absorb any light that hits the surface of the house. They are sometimes referred to as masking paints because their lack of reflectivity makes them ideal for masking imperfections in rough cladding materials such as wood or masonry.

If you don't want your sunny home to glare, matte gloss finishes absorb the sunlight. They also offer an attractive, modern, soft texture and easy application. And while they're not that durable, they're basicTouch that outer colorTyp.

Though their strength has increased over the years, these chalky, porous finishes are still the least durable. In addition, they are more difficult to clean than high-gloss paints. You will likely face the hassle and expense of painting matte painted facades sooner than you would with a satin or high gloss finish, especially if your home is regularly exposed to extreme weather conditions.


  • Fast drying time

  • Absorbs sunlight

  • Easy to contact

  • forgiveness of mistakes

  • Smooth application

  • Contemporary finish


  • Less durable

  • It's not easy to clean

  • It does not withstand extreme weather conditions

  • In houses in shady places it can look innocent

2. Eggshell

Analysis of the best glaze for exterior painting projects (2)

Photo: Iriana Shiyan/Adobe Stock

A soft, eggshell exterior color could be the right choice if you want a low-glare, non-reflective finish for your sunny interior. Eggshell gives you more durability and depth of color than a matte finish.

The subtle reflective sheen - which ranges from 12% to 20% - is perfect when you need to hide a lot of page flaws, and it glides over walls with ease. Easier to clean than a matte finish,Egg shell colorIt still doesn't offer the durability or ease of cleaning that you get with higher gloss finishes.


  • Easy to clean

  • Gentle exit

  • Ideal for DIY application

  • More durable than flat paints

  • Brings out the paint color and provides an attractive appearance

  • It provides a soft shine, even on sunny days


  • hard to touch

  • Not as durable as gloss paints

3. Satin

Analysis of the best glaze for exterior painting projects (3)

Foto: JTGrafix/iStock/Getty Images Plus

satin colorsglossier finishes adopt the best choice for exterior paint gloss. Since modern moisture-resistant formulas are widespread, satin colors have many advantages. Satin gloss finishes are reflective enough to protect your home from UV rays (with a reflectance of between 25% and 40%), but not so shiny that it hurts your eyes to look at them when the sun is beating down.

Even if they don't cover imperfections like low-gloss surfaces, satin paints are still quite forgiving on most surfaces and you won't need to repaint as often. If your home also collects dirt from surrounding streets, this shine is easy to remove. It is ideal forPaint shutters, wood and cement paneling, paneling and doors.

However, since this gloss finish tends to form round spots more easily than matte colors, you'll need to practice your application technique to achieve a flawless finish.


  • Continuous

  • Versatile

  • Subtle shimmer

  • Easy to clean

  • Resistant to stains and dirt


  • It is difficult to achieve a flawless finish

  • Thorough mixing is required for an even application

4. Semi Glossy

Analysis of the best glaze for exterior painting projects (4)

Foto: Solidago/iStock/Getty Images Plus

When you want durability and definition for exterior trim, architectural detail or doors, there's nothing like gloss semi-gloss paint. The smooth, bright surface ranges from approximately 40% to 85% reflectivity and is easy to clean, making it ideal for heavily used, dirt-prone doors and shutters.

However, satin finish is not the best choice to cover parts of the frame. All bumps and bumps are visible on the reflective surface, and applying this precise, thick paint is not easy. Stains and streaks on the overlaps are difficult to avoid and achieving a perfect finish on large areas can quickly become a headache. In addition, there can be very strong glare when exposed to direct sunlight, although the high gloss certainly makes an eye-catching statement.

Another consideration is that semi-gloss paints are more often oil based than latex or acrylic based. Although this increases their durability, oil-based paints typically emit volatile organic compounds (VOCs) that can harm people, pets, and the environmentUS Environmental Protection Agency.


  • Very durable

  • Easy to clean

  • dirt-repellent

  • High gloss defines the details


  • Expensive

  • Difficult to use

  • It has imperfections

  • Not always environmentally friendly

5. High gloss

Analysis of the best glaze for exterior painting projects (5)

Foto: irina88w/iStock/Getty Images Plus

While gloss exterior paint is the most durable of all gloss paints, they are not the best choice in most situations these days. If you are looking for something sturdyColor for finishing, this could be the sparkle for you. Otherwise, high gloss paint is a less attractive option due to excellent reflectivity (over 85%), cost, the challenge of achieving a smooth finish, and the possibility of imperfections.

In addition to the difficulties of the actual painting process, high gloss paints require more attention to detail when preparing your home for exterior painting. givenCost of painting the outside of your homeThis type of paint increases durability, you don't want to mess anything up with DIY. If you don't have a steady hand and want to use glossy paint, hire a professionalExterior painters near you.


  • Very difficult

  • Easy to clean

  • High definition for architectural details


  • Expensive

  • It emphasizes imperfections

  • May emit harmful VOCs

  • A challenge to achieve a smooth finish

  • On large surfaces it is not pleasant for the eye

Choosing the best gloss for exterior paints

Nowadays, most people opt for semi-gloss or semi-gloss gloss finishes. However, as with most painting decisions, the best gloss for your exterior painting project really depends on the look you want, the specifics of your project, and your budget. These five factors can help you figure out which shine is best for you.

  • Experience: The shinier the shine, the easier it is to make mistakes. Choosing a lower brightness when necessary will make your work easier when you want to DIY. Oneexterior paintercan usually be used well with any shine.

  • Condition of frame or trim: Do you have a lot of uneven, gnarled wood paneling? You'd be better off opting for a lower gloss finish where there's less chance of showing all those little imperfections.

  • square meters: Trying to achieve a flawless finish on the facade that covers most of the outside of your home will be next to impossible with a glossy finish. For a thinner, affordable, and easy-to-apply finish, use Satin, Eggshell, or Matte.

  • Esthetic: Lower gloss means less glare in a sunny home and a more subtle finish that blends in with your home environment. A higher gloss makes a clear statement, provides more light in shadowed areas and highlights architectural details.

  • traffic volume: If you've got kids who get caught in a mud bath every now and then, or are navigating dusty roads nearby, you might want to opt for a wipeable, glossier finish.


How do I choose a glaze? ›

The most important factor in choosing the right glaze is that the glaze works with your Choice of Clay. In other words, you need a low-fire glaze with low-fire clay and so on. Preference and artistic style does play a role, but this comes first.

What do you need to glaze successfully in painting? ›

To glaze, you'll need a glazing medium and a brush. Mix the glazing medium with your paint to create a transparent layer. Then, apply the glaze over your base layer, using smooth brushstrokes to spread the paint evenly. You can build up multiple layers of glaze for even more depth and richness.

What are the three essential ingredients of glaze? ›

Glazes need a balance of the 3 main ingredients: Silica, Alumina and Flux. Too much flux causes a glaze to run, and tends to create variable texture on the surface. The texture may vary from shiny, where the glass is balanced, to matte where the excessive flux oxides may form visible, possibly lumpy, crystals.

What is the most important ingredient in glaze? ›

Silica (or industrial sand) is the key ingredient in glass, raw clay, and ceramic glazes. Silica can be obtained naturally from quartz, sandstone, sand, or flint, or it can be manufactured as silica oxide. When making your own glazes, products like quartz, flint, and pure silica can be added as the glass-former.

What are the 4 main glaze types? ›

Basically, there are four principal kinds of glazes: feldspathic, lead, tin, and salt.

What is the perfect glaze consistency? ›

The glaze should be the consistency of corn syrup. Test the consistency by taking a spoonful from the bowl and drizzle back into the glaze; the drizzled glaze should leave a trail.

What glaze should I use for pottery? ›

You should always look for pottery glazes that can be fired at a low temperature. The minimum temperature range for such glazes should be between 1700 and 2000 degrees Fahrenheit. The low-fire glaze develops strong colors and is budget-friendly.

What kind of glaze do you use on ceramics? ›

A clear glaze will brighten and intensify underglaze colors even more. Technically, you could apply a translucent glaze on top of underglaze. However, most potters use clear glaze over underglaze decoration. Clear underglaze can be glossy, matte, or satin / semi-matte.

How thick should my glaze be? ›

Just right is about 'postcard' thickness. Rough guidelines: one dip 'instant' to 8 seconds, or two dips ('instant' to 2 sec. each), or a single pour, or 2-3 coats with a brush with each coat brushed in a different direction and waiting for the first coat to firm up/dry before second coat.


Top Articles
Latest Posts
Article information

Author: Dan Stracke

Last Updated: 10/09/2023

Views: 6036

Rating: 4.2 / 5 (43 voted)

Reviews: 90% of readers found this page helpful

Author information

Name: Dan Stracke

Birthday: 1992-08-25

Address: 2253 Brown Springs, East Alla, OH 38634-0309

Phone: +398735162064

Job: Investor Government Associate

Hobby: Shopping, LARPing, Scrapbooking, Surfing, Slacklining, Dance, Glassblowing

Introduction: My name is Dan Stracke, I am a homely, gleaming, glamorous, inquisitive, homely, gorgeous, light person who loves writing and wants to share my knowledge and understanding with you.